ALDERS & LANGE® > Vinyl-Engine®

Authentic
sound.
Spot-on.

VINYL-ENGINE®
Technical Excellence
and Custom Design.

lite-magazin - Testurteil 2025: Spitzenklasse (95/95 Punkte)

“lite” Lifestyle & Technology Magazine
Test rating: “Top-notch” (95/95)
Read the review

032026.LP-magazin_Testurteil_VE

LP Magazine 3/26
Alders & Lange Vinyl Engine VE 100-F
Read the review

Vinyl-Engine®

The Vinyl-Engine® is a modular, low-noise phono preamplifier featuring a two-stage circuit design. In addition to RCA inputs, it offers a 5-pin XLR input for interference-free transmission of the phono signal. A low-noise instrumentation amplifier enables balanced or unbalanced operation, which is particularly advantageous for MC cartridges.

The gain can be adjusted in four steps, while passive RIAA equalization with high-quality Vishay capacitors ensures precise signal processing. There are three phono input modules to choose from: the PM1 as the standard module for MM and MC cartridges, the PM2 with an additional Lundahl transformer (1:13) exclusively for MC cartridges, and the PM3 with fixed gain and impedance settings for special requirements. The high-quality power supply features an effective mains filter to minimize interference, a wear-free solid-state relay, and 12V trigger logic for remote control. Channel-isolated filter stages ensure maximum signal purity, while a watchdog monitors the voltages.

All signal paths and configurations are switched via gas-tight, gold-plated relays to ensure long-term stability. With top-quality components and precise circuit design, the Vinyl-Engine® meets the highest audiophile standards.

  • Phono Preamplifier
  • MM & MC Cartridges
  • Maximum Signal Purity
  • Modularly Expandable

Your Very Own VINYL-ENGINE®

Color perception is as individual as musical taste. That’s why we pay attention not only to the inside of our devices but also to the outside: You choose your favorite color!

More Information About the VINYL-ENGINE®

A color to suit your taste—sturdy and elegant

Our amplifiers impress not only with their sound but also with their appearance. The surface is finished with high-quality TIGER Drylac powder coating, which creates a subtle matte texture—durable, eco-friendly, scratch-resistant, and consistently elegant. Available standard colors:

  • Dust Gray (RAL 7037)
  • Jet Black (RAL 9005)
  • Traffic White (RAL 9016)

Custom Color of Your Choice

For an additional charge, we can produce any RAL color—in either a matte or glossy finish—perfectly tailored to your style. Upon request, we also offer high-quality wet paint finishes used in the automotive industry—for a particularly glossy finish or special effects.

VE 100-F VE 100-U VE 100-R VE 200 VE 300
MM/MC Module Gain: 40/50/56/60 dB Mode: Balanced or Unbalanced Load: 100/150/330/500/1k/47kΩ • • •
Operated via 3 rotary switches on the front panel LED display; additional Mute/Power buttons on the front panel (Figure 1) •
Operated via DIP switches on the bottom Only Mute / Power on the front (Figure 2) •
Operated via 3 rotary switches on the back Only Mute / Power on the front (Figure 2) •
Pure MC module with Lundahl input transformers Gain: 50/60/64/68 dB Mode: Balanced or Unbalanced Load: 80/120/200/250/330/500Ω •
Operated via 3 rotary switches on the front panel with LED indicators; additionally, Mute and Power controls on the front panel (Figure 1) •
MM/MC Module, Settings: Factory-set and soldered in place Gain: as desired [30 .. 66 dB] Mode: Balanced / Unbalanced as desired Load: as desired [10 Ω .. 100 kΩ] •
No settings options Only Mute / Power on the front panel (Figure 2) •

Figure 1

Figure 2

The VE 100 model is the most versatile model in the series and the only one available in the F, U, and R versions. These variants differ solely in the placement of the controls and allow for precise adaptation to personal ergonomic preferences—from direct access at the front to a deliberately minimalist, understated design.

The VE 200 follows a clearly defined, uniform operating concept with front-panel rotary switches and an LED display. No variants are available for this model. The focus is on uncompromising MC playback, achieved in part through high-quality Lundahl input transformers, which ensure maximum sound purity, dynamics, and low noise.

The VE 300 model embodies the ultimate in minimalism. All parameters are precisely set at the factory according to customer specifications, eliminating the need for any adjustments during operation. There are no variants of this model either.

Thus, the VE 100 model offers the greatest possible freedom in terms of operator ergonomics, while the VE 200 and VE 300 each follow a deliberately defined and consistently implemented philosophy.

PM1 Gain 40 / 50 / 56 / 60 dB
PM1 Input Resistances 100 / 150 / 330 / 500 / 1kΩ / 47kΩ
PM1 Modes Symmetric or Asymmetric Input
Input Capacitance 50 pF
Frequency Response / RIAA Accuracy ±0.1 dB (50 Hz … 20 kHz) / ±0.2 dB (20 Hz … 20 kHz)
-1 dB (15 Hz … 70k Hz) / -3 dB (7 Hz … > 100 kHz)
Signal to Noise Ratio (SNR)
95 dB(A) / 89 dB unweighted (20 Hz … 20 kHz)
@ MM (Gain 40 dB, 1 VRMS Output)
89 dB(A) / 82 dB unweighted (20 Hz … 20 kHz)
@ MM (Gain 40 dB, 5 mVRMS Input)
70 dB(A) / 63 dB unweighted (20 Hz … 20 kHz)
@ MC (Gain 60 dB, 500 μVRMS Input)
Total Harmonic Distortion (THD)
Total Harmonic Distortion + Noise (THD+N)
0.00035 % (THD) / 0.004 % (THD+N)
@ MM (Gain 40 dB, 1 VRMS Output)
0.0005 % (THD) / 0.008 % (THD+N)
@ MM (Gain 40 dB, 5 mVRMS Input)
0.004 % (THD) / 0.06 % (THD+N)
@ MC (Gain 60 dB, 500 μVRMS Input)
Max Output Level 18 dBV ≙ 8 VRMS (@ 1 kHz, THDMAX < 0.01 %)
Output Resistance 50 Ω
Recommended Output Load Impedance > 10 kΩ
Channel Crosstalk > 96 dB (Gain 40 dB)
> 80 dB (Gain 60 dB)
Channel Imbalance < 0.1 dB
Trigger In / Out 12 VNOM / 50 mAMAX (Output)
12 VNOM / 5 mA (Input), Input Range: 5 V … 18 V
Power Consumption 4 WNOM / 6 WMAX / < 0.2 WSTANDBY
Mains Voltage 230 V / 47 Hz … 63 Hz
Fuse 1 AT (@ Power Inlet) / 160 mAT (@ Mainboard)
Operating conditions Temperature +5°C to +35°C, Humidity: 5% to 85% (no condensation)
Dimensions 200 x 97 x 360 mm³ (Housing without Knobs & Connectors)
200 x 97 x 395 mm³ (Dimensions above all)
Weight 7.0 kg (net weight)

XLR-5 to SME Tonearm Connector

Perfect for turntables with SME tonearms. This cable provides a secure, interference-free balanced connection with excellent signal quality and full detail reproduction of your vinyl recordings.

XLR-5 to RCA Plug

The ideal solution for phono preamps or turntables with RCA connectors. High-quality shielding and precise craftsmanship ensure a clear, dynamic sound.

XLR-5 to 2x XLR-3 plugs

For professional stereo connections and the most demanding applications. This cable ensures balanced signal transmission, minimizes interference, and delivers a rich, balanced sound for audiophiles.

Why Choose Our Cables?

  • High-quality materials for optimal signal transmission
    Precision craftsmanship for long-lasting reliability
    Minimal noise thanks to effective shielding
    Perfectly matched to our high-quality VINYL-ENGINE® and VINYL-MASTER phono preamps

VINYL-ENGINE®:
For vinyl lovers

Analog sound at
the highest level.

Still not quite convinced?
Then schedule a trial lesson!

  • Simple and with no obligation
  • Ready to ship in 48 hours
  • The €50 trial fee will be credited toward your purchase
  • Risk-free returns

Our products are well thought out in every detail

Returns

Make an informed decision:
Test your device in your usual listening environment—with no risk and no time pressure.

5-YEAR Warranty

High-quality components, precision manufacturing, and a warranty that underscores our commitment to quality.

Sustainable

Built to last, not to be short-lived.
Modular in design, upgradeable, and engineered to deliver uncompromising musical enjoyment for many years to come.