VINYL-MASTER

4.800,00 € inkl. MwSt.

Delivery Time: ca. 2-4 Wochen (individuelle Fertigung)

SKU: N/A Category:

Description

The VINYL-MASTER is a modular, low-noise phono preamplifier for four cartridges, featuring a two-stage circuit design. In addition to four stereo RCA inputs, it offers four 5-pin XLR inputs for interference-free transmission of the phono signal. A low-noise instrumentation amplifier enables balanced or unbalanced operation, which is particularly advantageous for MC cartridges.

The gain can be adjusted in four steps, while passive RIAA equalization with high-quality Vishay capacitors ensures precise signal processing. The high-quality power supply uses an effective mains filter to minimize interference, a wear-free solid-state relay, and 12V trigger logic for remote control. Channel-isolated filter stages ensure maximum signal purity, while a watchdog monitors the voltages.

All signal paths and configurations are switched via gas-tight, gold-plated relays to ensure long-term stability. With top-quality components and precision circuitry, the VINYL-MASTER meets the highest audiophile standards.

Features:

  • Phono Module 1 for MM & MC Cartridges:
  • Balanced or unbalanced operation
  • Input impedances: 100 Ī©, 150 Ī©, 330 Ī©, 500 Ī©, 1 kĪ©, 47 kĪ©
  • Gain: 40, 50, 56, 60 dB
  • Adjustment of LOAD, MODE, and GAIN via rotary switches on the front panel
  • Rotary switches without detents
  • Multifunction switch for storage, switching, and muting
  • Input impedance, mode, and gain can be individually adjusted and stored for all 4 inputs
  • Visual and audible confirmation of storage
  • Switchable during full operation without noise interference thanks to automatic brief muting

Features:

  • 4 MM/MC inputs via RCA and XLR 5
  • Dual-mono configuration
  • Configurable MM/MC input
  • Symmetric or asymmetric input mode
  • 4 gain stages
  • 6 load stages
  • DC servo-controlled asymmetric RCA output
  • Low-noise power supply
  • Ultra-short signal path
  • Precision RIAA network
  • Integrated subsonic filter
  • Service-friendly
  • Minimal internal wiring
  • Low power consumption

 

Quality Takes Time

Our devices are crafted with the utmost care by hand in our workshop in the Lower Rhine region. Each piece is individually crafted and undergoes numerous quality control checks—which takes time. That’s why the current lead time is approximately 2–4 weeks. We’re convinced that this wait is worth it, because you’ll receive a product crafted to meet both our and your highest standards. To ensure you don’t take any risks, we’ll of course issue the invoice only upon delivery. That way, you can relax and look forward to your new audio experience.

Technical Specifications

PM1 Gain 40 / 50 / 56 / 60 dB
PM1 Input Resistances 100 / 150 / 330 / 500 / 1kΩ / 47kΩ
PM1 Modes Symmetric or Asymmetric Input
Input Capacitance 50 pF
Frequency Response / RIAA Accuracy ±0.1 dB (50 Hz … 20 kHz) / ±0.2 dB (20 Hz … 20 kHz)
-1 dB (15 Hz … 70k Hz) / -3 dB (7 Hz … > 100 kHz)
Signal to Noise Ratio (SNR)
95 dB(A) / 89 dB unweighted (20 Hz … 20 kHz)
@ MM (Gain 40 dB, 1 VRMS Output)
89 dB(A) / 82 dB unweighted (20 Hz … 20 kHz)
@ MM (Gain 40 dB, 5 mVRMS Input)
70 dB(A) / 63 dB unweighted (20 Hz … 20 kHz)
@ MC (Gain 60 dB, 500 μVRMS Input)
Total Harmonic Distortion (THD)
Total Harmonic Distortion + Noise (THD+N)
0.00035 % (THD) / 0.004 % (THD+N)
@ MM (Gain 40 dB, 1 VRMS Output)
0.0005 % (THD) / 0.008 % (THD+N)
@ MM (Gain 40 dB, 5 mVRMS Input)
0.004 % (THD) / 0.06 % (THD+N)
@ MC (Gain 60 dB, 500 μVRMS Input)
Max Output Level 18 dBV ≙ 8 VRMS (@ 1 kHz, THDMAX < 0.01 %)
Output Resistance 50 Ī©
Recommended Output Load Impedance > 10 kΩ
Channel Crosstalk > 96 dB (Gain 40 dB)
> 80 dB (Gain 60 dB)
Channel Imbalance < 0.1 dB
Trigger In / Out 12 VNOM / 50 mAMAX (Output)
12 VNOM / 5 mA (Input), Input Range: 5 V … 18 V
Power Consumption 4 WNOM / 7 WMAX / < 0.2 WSTANDBY
Mains Voltage 230 V / 47 Hz … 63 Hz
Fuse 1 AT (@ Power Inlet) / 160 mAT (@ Mainboard)
Operating conditions Temperature +5°C to +35°C, Humidity: 5% to 85% (no condensation)
Dimensions 200 x 97 x 360 mm³ (Housing without Knobs & Connectors)
200 x 97 x 395 mm³ (Dimensions above all)
Weight 7.2 kg (net weight)

Colors

This product is also available in various colors and configurations. RAL finishes are available for an additional charge of €300; custom RAL colors are also available upon request. We would be happy to advise you personally and work with you to find the right solution. Contact

Product safety

Product safety documents

Produkt teilen: