VINYL-ENGINE®

3.750,00 € – 5.200,00 € inkl. MwSt.

Delivery Time: ca. 2-4 Wochen (individuelle Fertigung)

SKU: N/A Category:

Description

The Vinyl-Engine is a modular, low-noise phono preamplifier featuring a two-stage circuit design. In addition to RCA inputs, it offers a 5-pin XLR input for interference-free transmission of the phono signal. A low-noise instrumentation amplifier enables balanced or unbalanced operation, which is particularly advantageous for MC cartridges.

The gain can be adjusted in four steps, while passive RIAA equalization with high-quality Vishay capacitors ensures precise signal processing. There are three phono input modules to choose from: the PM1 as the standard module for MM and MC cartridges, the PM2 with an additional Lundahl transformer (1:13) exclusively for MC cartridges, and the PM3 with fixed gain and impedance settings for special requirements. The high-quality power supply features an effective mains filter to minimize interference, a wear-free solid-state relay, and 12V trigger logic for remote control. Channel-isolated filter stages ensure maximum signal purity, while a watchdog monitors the voltages.

All signal paths and configurations are switched via gas-tight, gold-plated relays to ensure long-term stability. With top-quality components and precise circuitry, the Vinyl-Engine meets the highest audiophile standards.

Features:

  • Dual Mono Configuration
  • Configurable MM/MC Input
  • Symmetric oder Asymmetric Inputmode
  • 4-Gain Stages
  • 6-Load Stages
  • XLR5 und Cinch Input
  • DC Servo Controlled Asymmetric Cinch Output
  • Low Noise Power Suppy
  • Ultra Short Signal Path
  • Precision RIAA Network
  • Integrated Subsonic Filter
  • Service friendly
  • Minimal Internal Wiring
  • Low Power Consumption

 

Quality Takes Time

Our devices are crafted with the utmost care by hand in our workshop in the Lower Rhine region. Each piece is individually crafted and undergoes numerous quality control checks—which takes time. That’s why the current lead time is approximately 2–4 weeks. We’re convinced that this wait is worth it, because you’ll receive a product crafted to meet both our and your highest standards. To ensure you don’t take any risks, we’ll of course issue the invoice only upon delivery. That way, you can relax and look forward to your new audio experience.

Technical Specifications

PM1 Gain 40 / 50 / 56 / 60 dB
PM1 Input Resistances 100 / 150 / 330 / 500 / 1kΩ / 47kΩ
PM1 Modes Symmetric or Asymmetric Input
Input Capacitance 50 pF
Frequency Response / RIAA Accuracy ±0.1 dB (50 Hz … 20 kHz) / ±0.2 dB (20 Hz … 20 kHz)
-1 dB (15 Hz … 70k Hz) / -3 dB (7 Hz … > 100 kHz)
Signal to Noise Ratio (SNR)
95 dB(A) / 89 dB unweighted (20 Hz … 20 kHz)
@ MM (Gain 40 dB, 1 VRMS Output)
89 dB(A) / 82 dB unweighted (20 Hz … 20 kHz)
@ MM (Gain 40 dB, 5 mVRMS Input)
70 dB(A) / 63 dB unweighted (20 Hz … 20 kHz)
@ MC (Gain 60 dB, 500 μVRMS Input)
Total Harmonic Distortion (THD)
Total Harmonic Distortion + Noise (THD+N)
0.00035 % (THD) / 0.004 % (THD+N)
@ MM (Gain 40 dB, 1 VRMS Output)
0.0005 % (THD) / 0.008 % (THD+N)
@ MM (Gain 40 dB, 5 mVRMS Input)
0.004 % (THD) / 0.06 % (THD+N)
@ MC (Gain 60 dB, 500 μVRMS Input)
Max Output Level 18 dBV ≙ 8 VRMS (@ 1 kHz, THDMAX < 0.01 %)
Output Resistance 50 Ω
Recommended Output Load Impedance > 10 kΩ
Channel Crosstalk > 96 dB (Gain 40 dB)
> 80 dB (Gain 60 dB)
Channel Imbalance < 0.1 dB
Trigger In / Out 12 VNOM / 50 mAMAX (Output)
12 VNOM / 5 mA (Input), Input Range: 5 V … 18 V
Power Consumption 4 WNOM / 6 WMAX / < 0.2 WSTANDBY
Mains Voltage 230 V / 47 Hz … 63 Hz
Fuse 1 AT (@ Power Inlet) / 160 mAT (@ Mainboard)
Operating conditions Temperature +5°C to +35°C, Humidity: 5% to 85% (no condensation)
Dimensions 200 x 97 x 360 mm³ (Housing without Knobs & Connectors)
200 x 97 x 395 mm³ (Dimensions above all)
Weight 7.0 kg (net weight)

Variants

Variant Features Price
VE 100 – U
  • Phono Module 1 for MM & MC Cartridges:
  • Balanced or Unbalanced Operation
  • Input Impedances: 100 Ω, 150 Ω, 330 Ω, 500 Ω, 1 kΩ, 47 kΩ
  • Gain: 40, 50, 56, 60 dB
  • Adjustment of LOAD, MODE, and GAIN via microswitches on the bottom
€3,750, including VAT
VE 100 – F
  • Phono Module 1 for MM & MC Cartridges; see VE100-U for options
  • Adjustment of LOAD, MODE, and GAIN via rotary switches on the front panel
€4,150, including VAT
VE 100 – R
  • Phono Module 1 for MM & MC Cartridges; see VE100-U for options
    Adjustment of LOAD, MODE, and GAIN via rotary switches on the rear panel
€4,100, including VAT
VE 200
  • Phono Module 2 for MC Cartridges with Lundahl Transformer:
  • Balanced or Unbalanced Operation
  • Input Impedances: 80 Ω, 120 Ω, 200 Ω, 250 Ω, 330 Ω, 500 Ω
  • Gain: 50, 60, 64, 68 dB
  • Adjustment of LOAD, MODE, and GAIN via rotary switches on the front panel
5,200 € including VAT
VE 300
  • Phono Module 3 for MM or MC Cartridges:
  • Balanced or unbalanced operation, fixed according to customer specifications
  • Input impedances, fixed according to customer specifications (10 Ω…100 kΩ)
  • Gain, fixed according to customer specifications (30…66 dB)
  • No adjustment options; fixed values according to customer specifications
€3,850, including VAT
This product is also available in various colors and configurations. RAL finishes are available for an additional charge of €300; custom RAL colors are also available upon request. We would be happy to advise you personally and work with you to find the right solution. Contact

Product safety

Product safety documents

Produkt teilen: